1-2 Min Install · 30 Min Cure · No Tools

FOUR STEPS TO YOUR FIRST TRAIL.

No drilling. No permanent damage. Fits any shoe, any bike.

1 PEEL

Position the V5 Obsidian on your shoe sole. Peel the 3M VHB tape backing off the base plate.

30 seconds
2 PRESS

Apply Fevikwik or superglue to the Feet Slider. Attach the 3M tape. Apply a small amount of glue to the other side too. Press firmly onto your shoe sole.

1 minute
3 CURE

Install is done in 1–2 minutes. Wait 30 minutes for the bond to fully set. Don't ride yet — this is cure time, not work time.

30 minutes
4 RIDE

Drag your foot at 25–30 kmph. Real sparks. Leave your trail.

Every ride

⚠ The actual install takes 1–2 minutes. The 30-minute cure is just waiting time for the adhesive to reach full strength. 80 kmph tested after cure.

Removes cleanly with isopropyl alcohol. No damage to your shoe sole.

Product Specs

WHAT YOU'RE GETTING.

ProductV5 Obsidian Feet Slider
MaterialVolcanic alloy
Adhesive3M VHB + Fevikwik or superglue
Install time1–2 minutes
Cure time30 minutes
Speed tested80 kmph
Riding speed25–30 kmph drag
Shoe compatibilityAny shoe (flat sole)
RemovalIsopropyl alcohol, no damage
Safety First

WHERE NOT
TO USE IT.

The V5 Obsidian makes real sparks. Treat it like one.

— Near petrol pumps or fuel
— Near gas cylinders
— Near dry grass or leaves
— Near fireworks or pyrotechnics
— In crowds or markets
— In poorly ventilated indoor spaces

Ride on empty roads, dark tarmac, and flyovers. Ride safe. Then ride loud.

Questions

QUICK ANSWERS.

How exactly do I install it? +
Peel the 3M VHB tape and stick it to the V5 Obsidian base. Clean your shoe sole. Peel the second tape side. Add Fevikwik or a few drops of superglue for extra strength. Press firmly onto your shoe sole. Wait 30 minutes for the bond to cure. The actual install is 1–2 minutes — the 30 minutes is just waiting.
Does it work on all bikes? +
Yes. Pulsar, Apache, FZ, R15, Bullet, Duke, Splendor — any motorcycle. What matters is the shoe, not the bike.
Will it fall off at speed? +
3M VHB is used in automotive assembly. Fevikwik or superglue adds extra strength at the edges. 30-minute cure. Tested at 80 kmph. Nothing moves.
How long do the sparks last? +
Depends on the road, pressure, and speed. Like a bag of chips — it varies. Could be 10 minutes or a week.
Can I remove it without damaging my shoe? +
Yes. Isopropyl alcohol loosens the 3M VHB cleanly. No permanent damage to your shoe sole.
Order Now — Cash on Delivery